5-Port 10/100Mbps Ethernet Unmanaged PoE Switch(4-Port PoE)
Features:
Comply with IEEE 802.3i, IEEE 802.3u, IEEE802.3x , IEEE802.3az standards;
Supports IEEE802.3af、IEEE802.3at standards,PoE power up to 30W for each PoE port, all power up to 60W;
Default/Extend mode( PoE port rate of 10 Mbps, the farthest distance is 250 m) switch
Support 5 x10/100Mbps Auto-negotiation Fast Ethernet RJ45 ports with 4 port PoE function (port2-port5);
Supports IEEE802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode;
1K entry MAC address table of the switch with auto-learning and auto-aging;
Supports 6KV Surge Immunity for all UTP ports(reserved design);
LED indicators for monitoring PoE, Link / Activity;
External power supply, exquisite design, suitable for desktop install and use.
Description:
Chipset IP175G+IP804A
Standards and Protocols IEEE802.3i、IEEE802.3u、IEEE802.3x、IEEE802.3az、 IEEE802.3at、 IEEE802.3af
Interface 5 x 10/100Mbps Auto-Negotiation ports
Mode switch Defalut mode:1-5 port speed rate 100 Mbps,communicate with each other
Extend mode:1port speed rate 100Mbps,2-5 PoE port rate of 10 Mbps, the farthest distance is 250m,communicate with each other
Network Media 10Base-T: UTP 5e and above cable (maximum 250m)100Base-Tx: UTP category 5, 5e cable (maximum 100m)
Transfer Method Store-and-Forward
MAC Address Table 1K
Switching Capacity 1Gbps
Packet Forwarding Rate 0.744Mpps
PoE Ports(RJ45) 4* PoE ports compliant with 802.3at/af
Power Pin Assignment 4/5(+),7/8(-)
PoE Budget 60W
Power Supply DC 53.5V,1.2A External Power
Power Consumption Maximum(PoE on): 66.5W(220V/50Hz)
Dimensions ( W x D x H ) 89.3*81.7*21.3mm