Alfa Bema Main drawing machine
1.1机器型式 水平四塔轮水箱式拉丝机
Machine type:horizontal four-cone wet wire drawing machine
1.2机体结构 钢板、方钢焊接经退火处理
Construction of machine body:Welded steel plate with annealing treatment
1.3拉拔材料 热处理后的410、430不锈铁丝
Drawing material:410、430 stainless wire after heat treatment
1.4拉拔道次 21模×2
Drawing passes:21 dies *2
1.5拉拔速度 最大15米/秒(设计最大速度)
Max drawing speed:15m/s
1.6工作速度 10-12米/秒(正常生产速度)
Normal drawing speed:10-12m/s
1.7电机功率 主电机7.5KW
Motor power:Main power is 7.5KW
1.8传动方式 高效同步轮、同步带传动
Driving type:Efficient synchronous wheel synchronous belt transmission
1.9塔轮 模具钢真空淬火处理(HRC60-65)塔轮最大直径φ200mm
Cone: import molding tool steel vacuum quenching process(HRC60-63),max diameter of cone is φ200mm.
1.10塔轮使用寿命 保用一年(单片组装式塔轮,如果出现一片起沟只需更换一片)
Lifespan of cone: one year(Single assembly cone,only need to change the one problem cone )
1.11润滑液供给 集中循环,冷却系统(用户管道及电缆地沟形式,用户确认)
Lubricants supply: centralized cycle,cooling system(user should confirm the pipeline and cable trench type).
1.12进线直径 φ0.8mm-φ0.7mm
Inlet: φ0.8-0.7mm
1.13出线直径 φ0.19mm-φ0.1mm
Outlet:φ0.19-0.1mm
1.14进线抗拉强度 ≈530Mpa
Tensile strength of inlet: ≈530Mpa
1.15模子尺寸:φ25×15mm(1-20道最大φ25×15mm,成品模最大φ25×10mm)(用户核准)
Die size:φ25×φ15mm(max of #1-#20 is φ25×15mm,and max of FG dies is φ25×10mm(should confirmed by customer)
1.16产量:进线φ0.7-φ0.13按700m/min可生产约8.8kg/小时,按8小时计日产量约70kg
Capacity:if inlet is φ0.7-φ0.13 and speed is 700m/min,then the output per hour is 8.8kg, and daily output is about 70kg based on 8 hours.
1.17外形尺寸: 长2700mm×宽1100mm×1800mm
Outline dimension:L 2700mm×W 1100mm×H 1800mm
1.18重量: 1.33T
Weight:1.33